|
Home Trailer Ramps ATV Ramps UTV/Golf Cart Ramps Car, Semi & Bus Service Ramps ATV Sport Rack System for Truck Bed Motorcycle Ramps Tilt-A-Rack Motorcycle Carriers RAGE Motorcycle Carriers VersaHaul ATV & Motorcycle Carriers Snow Mobile Ramps Hitch mounted Carrier Accessories Lawn and Garden Ramps Multipurpose / Mobility Ramps Work and Display Stands Utility Ramps Cargo & Utility Carriers RAGE Cargo Carriers B-Dawg Cargo Carriers Kayak / Lumber Bed Extender Aluminum Hay Ring Feeder Pet Ramps Wheelchair/Scooter Carrier Wheelchair Van Ramps Wheelchair Track Ramps Wheelchair - Modular Wheelchair - Multifold Wheelchair - Pathway Wheelchair - Singlefold Wheelchair - Suitcase Wheelchair - Bariatric Solid & Threshold Ramps Self-Supporting Threshold Ramps Wheelchair Carrier Accessories Sales Policy

Please see our Sales Policy
for detailed information regarding purchases.
|
Most ramps are manufactured in the USA.
|

| |

Back

Features:
- Transports wheelchairs, scooters, equipment, cargo, just about anything!
- 500 lb weight capacity
- Folds up when not in use
- Huge usable surface
- Extra long 27.5” wide x 60” long self storing loading ramp
- Black powder coat finish
- Easy Installation
- Leveler bolt and anti-wobble collar included
- Heavy duty extra thick steel mesh surface
- 1 year warranty!
The SC500 features an integrated 2 section ramp which folds up and out into 3
different positions. The first position keeps the ramp folded
flat to the carrier surface and held down with a spring pull pin. The folded
flat position is to keep the ramp self stored and secured when
the carrier is folded up. The second ramp position allows the ramp to stand up
straight when a mobility device or equipment is on the
carrier. The ramp is held vertically in place with a spring pull pin. The last
position is the ramp unfolded. This position allows for scooters,
power wheelchairs, and just about anything with wheels to be pushed or powered
up the ramp.
A welded handle featured on the ramp allows for easy folding and unfolding. Tie
down straps can be hooked onto any of the 10 tie down
holes featured on the 4 1/4” tall sides. The rear of the carrier has 2
reflectors for greater visibility at night.
Supporting the carrier is the heavy duty 2” hitch tube which features 4 bolts
and a safety pin underneath to allow the hitch tube to be removed from the
carrier. The hitch tube has a 5/8” hitch pin hole for securing the carrier to
your vehicle and will work on class III or IV hitches. This carrier is not
recommended
for 1 1/4” hitches.
Please Note: Mobility devices are not to be occupied when loading, unloading,
or on the carrier! Never exceed the rated capacities of your hitch.
|
Item Number |
Length |
Width |
Weight |
Weight Capacity |
Price |
Shipping |
|
SC500 Carrier |
48.5" |
28" |
84 lbs. |
500 lb. |
$420 |
$50 |
Maximum chair width 27 inches
Shipping to the lower 48 states only. (Alaska & Hawaii contact
Tony.)
Contact TNT Ramps:
Tony Aragon, Owner
Albuquerque, NM
Phone : 505-897-1278
Toll Free: 1-877-371-2814
Cell: 505-350-0155
Email:
tony@tntramps.com
Business hours: 8am-6pm(MST) Monday - Saturday
|